To view travel information about your current trip, open GPS data and select Trip distance.

To view options, select Options and select from the following:

• Start – Turn on the calculation of the distance, time and average and maximum speeds.
• Stop – Stop the trip distance meters. The values already calculated remain on the display.
• Resume – Continue using the trip distance meters.
• Reset – Set all calculated values except Odomet. and Tot. time to zero.
• Restart – Clear all calculated values and restart the calculations.
• Clear – Empty all trip distance values.
• Satellite status – View the signal strength of the satellites that provide the positioning information for navigation. To function properly, GPS data must receive positioning information from at least three satellites. If the satellite signal is lost during the trip, the trip distance values you can see are not current, but based on the latest positioning information available.

The available options may vary.

Related topics

• Travelling aid

• Navigation view

• Position view