#
# BT Factory Settings Information File
# ====================================
#
# All Factory settings information must be stored as follows
#
# Philips:
# <CHIP_ID> <HCI_revision> <LMP_Subversion> <FactorysettingsFile_HEAD_xx)>
#
# there CHIP_ID, HCI_revision and LMP_Subversion are read from firmware at start-up.
#
# ST: <CHIP_ID> is set to 0x00000000 since this is not used by ST.
#
# ====================================
# STLC2593_R5_02_01_SEMC_Shiho.ssf                      static settings file for STLC2593 D2
# STLC2593_R5_03_02_SEMC_SPI_unified_full_PU.ssf        static settings file for STLC2593 D3
# ----------------------------------------------------------------------------------------
# 
0x00000000	0x0502	0x00F0	STLC2593_R5_02_01_SEMC_Shiho.ssf
0x00000000	0x0503	0x00F1	STLC2593_R5_03_02_SEMC_SPI_unified_full_PU.ssf