Search
replies: 1
windows mobile firmware version lg gm730 t-mobile mda compact iv o2 xda diamond sony ericsson xperia x1 htc kovsky lg eigen lg gm730f
1 | MScorpionZ Date • 11/1/2009, 12:04 Start -> Settings -> second tab “System” -> item “System information” -> Version information You can also use the engineering menu, but it’s better not to | ||
| Send this answer by email | |||
1 | Download the application http://www.sonyericsson.com/cws/support/ph...lc=ru&cc=ru , install, run, and follow the instructions. There should be no firmware on the memory card! Additional user manual from SE http://www.sonyericsson.com/cws/support/ph...lc=ru&cc=ru . If flashing fails: Try connecting your Xperia X1 via a different USB port. Don't use a hub. Try disabling advanced synchronization options (on a PDA: start - settings - connections - connection to PC). Restart your PC. Try using another PC to flash the firmware. Disable Firewall, it may be blocking the firmware. SEUS may not be able to flash a device with HardSPL installed. | ||
| Send this answer by email | |||
1 | ATTENTION! HardSPL firmware voids the warranty. The material presented by the author is unofficial; in case of unsuccessful firmware or the death of the device, the author of the software and the Administration of the resource are not responsible! All actions are performed at your own peril and risk! Before flashing the firmware, make sure that the .NET framework and the latest version of MS ActiveSync (or Mobile Device Center if you have Windows Vista or Windows 7) are installed on your computer. There should be no firmware on the memory card! 1.Download and unpack the X1_HardSPL_v1.zip archive into any empty folder; 2.Synchronize Xperia X1 with your computer. Wait for the synchronization to finish! 3.Run X1_HardSPL.exe from the folder with the contents of the X1_HardSPL_v1.zip archive with administrator rights: If you are using Windows Vista/7, run the utility with administrator rights through the menu that appears when you right-click X1_HardSPL.exe. If you have Windows XP, make sure you have administrator rights; 4.Follow the instructions of the flashing program, check the Xperia X1 screen for prompts; 5.Xperia X1 should show a 3-color screen; 6.Xperia X1 will start HardSPL firmware and reboot automatically. If automatic reboot does not occur, after completing the firmware process, do CP manually or remove and reinsert the battery To confirm the success of HardSPL firmware, enter the device into bootloader mode. To do this, with the device turned off, hold the volume down button, press and hold the power button. The device will show a three-color screen. If the firmware was successfully installed, you will see a message on the three-color screen. If you can't flash HardSPL: re-read the instructions. Try connecting your Xperia X1 via a different USB port. Don't use a hub. Try disabling advanced synchronization options (on a PDA: start - settings - connections - connection to PC). Restart your PC. Try using another PC to flash the firmware. Disable Firewall, it may be blocking the firmware. If HardSPL has been flashed, there is no need to re-flash HardSPL when installing new ROMs. The flasher posted in this post is intended only for HardSPL firmware! | ||
| Send this answer by email | |||
1 | Important! Before returning the official SPL, please install the official firmware and the official Radio firmware! There should be no firmware on the memory card! 1.Download http://4pda.ru/forum/dl/post/311987/StockSPL.zip 2.Download and unpack into an empty folder http://4pda.ru/forum/dl/post/311897/X1_HardSPL_v1.zip 3 .Run "X1_HardSPL.exe" from the archive "X1_HardSPL_v1.zip" with administrator rights, but do not click the "next" button; To run with administrator rights: If you are using Windows Vista/7, run the utility with administrator rights through the menu that appears when you right-click X1_HardSPL.exe. If you have Windows XP, make sure you have administrator rights; 4.Copy the file "RUU_Signed.NBH" from the archive "StockSPL.zip" to the folder with the contents of the archive "X1_HardSPL_v1.zip". Next, follow the instructions of the flasher. If the official SPL firmware is successfully flashed, you will see 0.72.0000 in the bootloader window instead of 0.72.OliNex. After restoring the official SPL, I recommend using the SEUS program to install the latest firmware and SPL versions before warranty repair. | ||
| Send this answer by email | |||
1 | Flashing the ROM will result in the loss of all settings and personal data stored in the internal memory of the device. Be sure to make a backup. Hard SPL is required for ROM flashing! If you want to manually flash the official firmware, there is no need to flash HardSPL. Method 1: flashing firmware from memory card 1. Charge the battery to at least 50%; Make sure the memory card is formatted in FAT32. If the memory card is already in FAT32 file architecture, there is no need to delete files from the memory card; 2. Rename the *.nbh firmware file to "KovsImg.nbh". If you do not see the firmware file extension on your PC, set “show file extensions” in the folder properties (control panel). 3. Copy the firmware file "KovsImg. There should be only one firmware on the memory card. 4. Turn off the device. Enter it into bootloader mode. To do this, with the device turned off, hold the volume down button, press and hold the power button until a three-color screen appears. Follow the instructions. Upon completion of the firmware (when Update Successful appears on the screen), press the CP button or remove and insert the battery; 5. Turn on the device. If errors occur, format the memory card, try flashing from another memory card, or use the flashing method described below using RUU. Method 1: flashing firmware from memory card 1. Charge the battery to at least 50%; Make sure the memory card is formatted in FAT32. If the memory card is already in FAT32 file architecture, there is no need to delete files from the memory card; 2. Rename the *.nbh firmware file to "KovsImg.nbh". If you do not see the firmware file extension on your PC, set “show file extensions” in the folder properties (control panel). 3. Copy the firmware file "KovsImg.nbh" to the root of the memory card; disconnect the USB cable; There should be only one firmware on the memory card. 4. Turn off the device. Enter it into bootloader mode. To do this, with the device turned off, hold the volume down button, press and hold the power button until a three-color screen appears. Follow the instructions. Upon completion of the firmware (when Update Successful appears on the screen), press the CP button or remove and insert the battery; 5. Turn on the device. If errors occur, format the memory card, try flashing from another memory card, or use the flashing method described below using RUU. It is strongly recommended to do XP after the firmware. | ||
| Send this answer by email | |||
2 | Method 2: flashing firmware from a PC using RUU - ROM Update Utility There should be no firmware on the memory card! 1. Charge the battery to at least 50%. 2. Install the latest version of "Windows Mobile Device Center/ActiveSync" and ".NET frameworks"; 3. Unpack the “RUU_Kovsky” folder from the X1_RUU_ROM_UpdateUtility.zip archive into an empty folder on your PC; 4. Copy the *.nbh firmware file (only one!!!) to the unpacked “RUU_Kovsky” folder; 5. Synchronize your device. Wait for the synchronization to complete successfully; 6. Run "ROMUpdateUtility.exe" with administrator rights: 7 If you are using Windows Vista/7, run the utility with administrator rights through the menu that appears when you right-click ROMUpdateUtility.exe. If you have Windows XP, make sure you have administrator rights; Follow the instructions. If you can't flash via RUU: re-read the instructions. Try connecting your Xperia X1 via a different USB port. Don't use a hub. Try disabling advanced synchronization options (on a PDA: start - settings - connections - connection to PC). Restart your PC. Try using another PC to flash the firmware. Disable Firewall, it may be blocking the firmware. | ||
| Send this answer by email | |||
1 | The Radio ROM firmware should not lead to the loss of all settings and personal data stored in the internal memory of the device. However, it is recommended to make a backup. Hard SPL is required for Radio ROM firmware! Method 1: flashing firmware from memory card 1. Charge the battery to at least 50%; 2. Make sure the memory card is formatted in FAT32. If the memory card already has a fat32 file structure, there is no need to delete files from the memory card; 3. Rename the radio firmware file in *.nbh format to "KovsImg.nbh". If you do not see the firmware file extension on your PC, set “show file extensions” in the folder properties (control panel). 4. Copy the radio firmware file "KovsImg.nbh" to the root of the memory card; disconnect the USB cable; There should be only one firmware on the memory card. 5. Turn off the device. Enter it into bootloader mode. To do this, with the device turned off, hold the volume down button, press and hold the power button until a three-color screen appears. Follow the instructions. 6. Upon completion of the firmware (when Update Successful appears on the screen), press the CP button or remove and insert the battery; 7. Turn on the device. If errors occur, format the memory card, try flashing from another memory card, or use the flashing method using RUU. | ||
| Send this answer by email | |||
2 | Method 2: flashing firmware from a PC using RUU - ROM Update Utility There should be no firmware on the memory card! 1. Charge the battery to at least 50%. 2. Install the latest version of "Windows Mobile Device Center/ActiveSync" and ".NET frameworks"; extract "X1_CustomRUU.exe" from the X1_RUU_Radio_UpdateUtility.zip archive into an empty folder on your PC; 3. Copy the radio firmware file *.nbh (only one!!!) to this folder; 4. Synchronize your device. Wait for the synchronization to complete successfully; 5. Run "X1_CustomRUU.exe" with administrator rights: 6. If you are using Windows Vista/7, run the utility with administrator rights through the menu that appears when you right-click X1_CustomRUU.exe. If you have Windows XP, make sure you have administrator rights; Follow the instructions. If you can't flash via RUU: re-read the instructions. Try connecting your Xperia X1 via a different USB port. Don't use a hub. Try disabling advanced synchronization options (on a PDA: start - settings - connections - connection to PC). Restart your PC. Try using another PC to flash the firmware. Disable Firewall, it may be blocking the firmware. | ||
| Send this answer by email | |||
1 | With the device turned off, hold the volume down button, press and hold the power button until a three-color screen appears. You will see information about the installed SPL. | ||
| Send this answer by email | |||
answers: 1
windows mobile firmware application format multimedia sony ericsson xperia x1 files htc kovsky
1 | In most cases, it is enough to rename the firmware file to a *.nbh file. If you do not see the extension of the firmware file, enable the display of extensions on your PC (control panel → folder properties). If you cannot install the *.nbh firmware obtained this way, you most likely need to use another method: 1) Rename the *.image firmware to *.image.nbh; 2) Download NBHUtil.zip 3) Run "NBHUtil.exe"; Select the "Extract NBH" tab. You will see something like Model ID: KOVS***** Target CID: 11111111 Version: 1.02.932.3 Language: DEU ← remember this value Chunk Size: 64 5) Click the "Extract" button; 6) Save as OS.nb; 7) Go to the "Build NBH" tab; 8) Select model "X1"; 9) In the Language column, select the value you remember; 10) Click on "..." next to "OS"; 11) Select the previously extracted OS.nb file; 12) Click "Build NBH"; 13) Save as "Kovsimg.nbh" | ||
| Send this answer by email | |||
1 | cracks; defective headphone jack; keyboard defect; peeling paint; uneven screen backlight; Broken screen and camera matrix pixels. The cable may also fray. | ||
| Send this answer by email | |||
answers: 3
windows mobile headset sound headphones marriage accessories speaker multimedia sony ericsson xperia x1 htc kovsky
1 | The device probably thinks that a wired headset is connected to it - so no sound comes out to the external speaker. option one - pick at the connector with a toothpick/clip/pin - maybe the contacts will come unstuck (pick with metal objects after removing the battery) option two - take it to a service center to replace the connector | ||
| Send this answer by email | |||
2 | Not so long ago, I already wrote about this here, the audio output began to glitch, or rather it seemed to him that a stereo headset was connected to it. It was treated by blowing through the entrance or shaking the phone, but not for long. After googling, I found out that many people have this problem. I took it to an unofficial service center. The next day they returned it, saying that they had cleaned the contacts and the problem should go away. Which is exactly what happened. | ||
| Send this answer by email | |||
3 | On my X1 connector there was a cold solder (the connector to the board was poorly soldered). Some people experience sticking of the contact, which is treated by bending it by 0.25 mm. The service center solved the problem in 20 minutes. Since then the flight has been normal. | ||
| Send this answer by email | |||
12
The front panel and keyboard keys no longer work the first time or start working twice. What to do?
1 | Most likely, dust has accumulated under the keys and needs cleaning. To eliminate software errors, do a Hard reset and check if the problem is resolved. If the problem persists, contact the service center. At your own risk, you can clean the keyboard yourself; use the instructions published on xda-developers.com | ||
| Send this answer by email | |||
