#
# BT Patch Information File
# ====================================
#
# All patch file information must be stored as follows
#
# Philips:
# <CHIP_ID> <HCI_revision> <LMP_Subversion> <Patchfile>
#
# there CHIP_ID, HCI_revision and LMP_Subversion are read from firmware at start-up.
#
# ST: <CHIP_ID> is set to 0x00000000 since this is not used by ST.
#
# ====================================
# STLC2500_R4_02_A7.ptc      patch for STLC2500C4 and STLC2590
# STLC2500_R5_01_A8.ptc      patch for STLC2592
# STLC2500_R5_02_A1_E7.ptc   patch for STLC2593 (2593 D2)
# STLC2500_R5_03_A11_E2.ptc  patch for STLC2593 (2593 D3)
# ----------------------------------------------------------------------------------------
0x00000000	0x0402	0x0520	STLC2500_R4_02_A7.ptc
0x00000000	0x0501	0x00EF	STLC2500_R5_01_A8.ptc
0x00000000	0x0502	0x00F0  STLC2500_R5_02_A1_E7.ptc
0x00000000	0x0503	0x00F1  STLC2500_R5_03_A11_E2.ptc
