[GUIDE] Z Ultra and Z1 HARD BRICK RECOVERY

mnoruzi72 · Oct 17, 2014

the_laser said:
how came that "you updated that by pc companion" yet you do not have flashmode ?
anyway, i can't help you more, sorry.

I connected phone to PC (when that was turn on) and pc companion known that and said you can update your phone .so i agreed that and after download required file my phone restarted and i think for moment had go to flashmod (just o think because the LED was blue) and my phone updated .
at the first when i flash file whit s1tool at the end s1tool wrote "skip simlock.ta" i think it's for that .and now i just flash that whit test point and emergency mod but still same problem .
however thank you for your help.(your are good man)
...

add:
and now i restore my TA backup (as you told me) and everything is good simcard work ,fastboot and flashmod work .
again i want to say thank you Mr laser and if you allowed me i want to create new topic in xperia V topic and say it to other people like me, because they wanted it.can i make it ? do you help them?(if they have original TA backup)

Deleted member 3665957 · Oct 17, 2014

to be honest, i'm not understand anything

to fix phone with problem like yours , you need

1. restore security units
2. reflash phone fully ( APP + FSP firmware parts )
3. poweron phone, root phone, restore full trim area backup.

i'm think this is what you had done in the end.

it is not problem to make security units backup from dumped trim area, so if somebody else have such problem, it can be fixed.

ps.
please share DLOAD picture for lt25 phone.

mnoruzi72 · Oct 23, 2014

the_laser said:
to be honest, i'm not understand anything

to fix phone with problem like yours , you need

1. restore security units
2. reflash phone fully ( APP + FSP firmware parts )
3. poweron phone, root phone, restore full trim area backup.

i'm think this is what you had done in the end.

it is not problem to make security units backup from dumped trim area, so if somebody else have such problem, it can be fixed.

ps.
please share DLOAD picture for lt25 phone.

I've done this :
http://xdaforums.com/xperia-t-v/general/xperia-hard-brick-recovery-t2915303
if there is something wrong tell me .to fix or change that.(unfortunately i have problem with English language ).

mnoruzi72 · Oct 24, 2014

the_laser said:
it is not problem to make security units backup from dumped trim area, so if somebody else have such problem, it can be fixed.
.

in this post there is somebody with same problem,and he needs to script:
http://xdaforums.com/showpost.php?p=56231898&postcount=2

TuMyP.H · Oct 24, 2014

Z Ultra C6802

Code:

Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"
 
PROCESSING ...
SERIAL NUMBER : 00000000
HARDWARE ID : 04000100E1007B00
PRODUCT DETECTED: "MSM8974 OEM1 fused"
HASH 0000000000000000000000000000000000000000000000000000000000000000 NOT SUPPORTED
Elapsed:43 secs.

What does it mean? CPU or memory issue?

TheManGer · Oct 25, 2014

Thank you!!

First i want to thank all of you to share your knowledge with me (us)
i removed the Backcover and flashed the emergency Backup provided in this thread. After the succesfull flashing i got the Xperia Z1 to show the Sony Logo, after some seconds the phone goes bak to black and show the brand logo again. Have anybody a solution for that? I have a TA Backup on my PC.

:crying:

I hope you can help me

(Sry for my english)

blueether · Oct 25, 2014

TheManGer said:
First i want to thank all of you to share your knowledge with me (us)
i removed the Backcover and flashed the emergency Backup provided in this thread. After the succesfull flashing i got the Xperia Z1 to show the Sony Logo, after some seconds the phone goes bak to black and show the brand logo again. Have anybody a solution for that? I have a TA Backup on my PC.

:crying:

I hope you can help me

(Sry for my english)

Now you have it booting have you tried to flash a full FTF - just a thought

TheManGer · Oct 26, 2014

Thank you so much...

My Phone works again!

Status before:

I flashed a CM ROM over my LB Device. After this the Screen always was black and nothing works. Power ON without any function, no status LED.. When Pulling Power + Volume Buttons the phone vibrates a single time and go off again.

I open the cover with a credit card, removed the battery and bridge the testpoint to GND. After that i flashed the Phone like the first step with the C6603 file. After that the Phone shows the SONY LOGO and stay in a bootloop. I tryed to flash many times the ftf file but i don`t work with flashtool
Version: 0.9.14.0 it always stop the firmware flashing at 25 % without any error.

after few trys i found that the Version 0.9.18.3 is available so i download this version of the flashing tool.

I found the C6603 FLT File FD5503_14.4.A.0.108_GenericDE on a mega upload server and download this.
after that i used the new Version 0.9.18.3 of the flashtool and flashed the new flt file on the phone.
After that the Sony Z1 boots without any issues to the Stock ROM. I used Newroot and Root the Phone again. After that i restore my TA Backup and everything works fine. :victory::laugh::fingers-crossed::highfive:

Deleted member 3665957 · Oct 26, 2014

TuMyP.H said:
Z Ultra C6802

Code:

SERIAL NUMBER : 00000000 HARDWARE ID : 04000100E1007B00 PRODUCT DETECTED: "MSM8974 OEM1 fused" HASH 0000000000000000000000000000000000000000000000000000000000000000 NOT SUPPORTED Elapsed:43 secs.

What does it mean? CPU or memory issue?

cpu issue

yamazaki corp · Nov 2, 2014

thank you very much

thank you very much

andube looking very much and thanks to you I could recover the phone thank you very much.
----------------------------------------------------------------------------------------------------------------------

muchas gracias amigo

andube buscando muchisimo y gracias a ti pude recuperar el celular muchas gracias

Exaita · Nov 2, 2014

So i have a xperia z ultra that was given to me . I sent it to sony and they call back saying that i need to replace the mainboard as the software is modified(i trying to act dumb). I gave up on repairing it as i can buy a new phone for the price given. The phone was rooted to GPE so i was wondering if this method will work? I am kinda new to this so hope someone can guide me. Thanks

sasanss22 · Nov 2, 2014

the_laser said:
to be honest, i'm not understand anything

to fix phone with problem like yours , you need

1. restore security units
2. reflash phone fully ( APP + FSP firmware parts )
3. poweron phone, root phone, restore full trim area backup.
.

hi
i have a xperia z With unknown baseband
phone boot normal..
fatstboot OK
flashmod OK
i can backup ta.img
my phone dial *#06# no imei
flash with flashtools
flash with setools
and Sam error again
no imei
I attached my ta backup after get this error
can i repair this??
how to repair
please help me .... tanks

crazypushy · Nov 3, 2014

S1Tool for MSM8274

I tried flashing a custom rom (pacman) over stock rom, and bricked my phone.
Its a Z1, C6902, but with MSM8274 chipset. I used your latest S1Tool and get this message

will use Sahara protocol ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PROCESSING ...
SERIAL NUMBER : DD90FF01
HARDWARE ID : 04000100E1207B00
PRODUCT DETECTED: "MSM8274 OEM1 fused"
HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
HARDWARE ID 04000100E1207B00 NOT SUPPORTED

Is there any chance you'll enhance this tool for this chipset support please ?
I'm sure many of us are in same boat .....
Any other way to recover ?
Symptoms are same Red LED lights up after 2-3 minutes, on connecting usb cable, and stays ON all time. Device manager reports unknown device normally, but upon testpoint grounding, SEMC flash is reflected.
Please help, much appreciated !!
Regards

munjeni · Nov 7, 2014

Tool for converting TA.img to TA_unbrick.SYN_FILE_SET

Since I bricked my TA I was not able to repair TA by using gdfs, do not know why, but I created tool for unbricking TA partition, TA backup is required to get tool working! Here is tool for all who have TA.img and bricked TA partition inside phone, tool will convert your TA.img to TA_unbrick.SIN_FILE_SET so you can easily repair your TA partition and flash the rest of firmware, enjoy!

Windows machine is required!

How to use:
- put TA.img to the same folder
- run ta_gen.exe

Makiavell · Nov 7, 2014

munjeni said:
Since I bricked my TA I was not able to repair TA by using gdfs, do not know why, but I created tool for unbricking TA partition, TA backup is required to get tool working! Here is tool for all who have TA.img and bricked TA partition inside phone, tool will convert your TA.img to TA_unbrick.SIN_FILE_SET so you can easily repair your TA partition and flash the rest of firmware, enjoy! Windows 32 bit is required!

Amazin'! good job :good:

kevin Hansjaya · Nov 11, 2014

Please Help me if somebody know to Fix

Hi, i'm from Indonesia.
i have hard bricked my Z ultra.
the root of my Zul bricked when i want to flash deodexed.
before i flash the zip , i wipe cache and instal it
after reboot my phone have boot loop , and i use Hard reset.
now my phone cant go to fashboot mode and flashtool
can't detect ADB.
so i can't fix this phone. I charging to wall charge 10+ hours, now i got LED RED not blinking.
i try to connect to PC but still can't flash the tft.

Please help me guys.

Regards,
Kevin

munjeni · Nov 12, 2014

@the_laser, which box I need to buy for jtag solution on msm8974 (xperia z1 compact), thx in advance!

ivans511@gmail.com · Nov 13, 2014

I have the same problem with MSM8274 chipset, and is there any solution thanks

inunxelex · Nov 15, 2014

Xperia M MSM8227

@the_laser, is updated s1tool support for MSM8227 ?

ShaQ1nJ · Nov 16, 2014

Stuck on PROCESSING: tz_S1_Boot_MSM8974

Hello there,

I have a C6806 Xperia Z Ultra, and one day, all applications on the phone started force closing. I turned the phone off and turned it back on, but now, it blinks red three times. I cannot get into fastboot or flash mode. I tried using this method to unbrick the phone, but I am stuck at "PROCESSING: tz_S1_Boot..." with "MINOR ERROR 0017". I am trying to flash the APP file inside the c6806.7z file. Full log is below. Any suggestions?

Code:

Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"
 
PROCESSING ...
SERIAL NUMBER : 97A5F201
HARDWARE ID : 04000100E1007B00
HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
Emergency loader uploaded ...
 
RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
LOADER AID: 0004
DEVICE ID: 01F2A597
FLASH ID: "0015/01000001"
LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"
 
WRITING PACKAGES ...
Processing package
C:\Users\user\Downloads\tools\14_2_A_0_290.APP_SW_Togari_GENERIC_1271_5715_S1_SW_LIVE_6732_PID1_0005_MMC.SIN_FILE_SET
 
WILL UPDATE BOOT TO : 1270-3115 S1_BOOT_MSM8974_LA1.04_15
PARSING: "DEVELOPMENT"
value OTP_LOCK_STATUS_1 :  UNLOCKED, not match LOCKED
PARSING: "TEST_OEM0_007B00E1"
value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED
value OTP_DATA_1 :  00000100, not match 01000400
value IDCODE_1 : 007B00E1, match 007B00E1
PARSING: "PRECOMMERCIAL_007B00E1"
value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED
value OTP_DATA_1 : 01000400, match 01000400
value IDCODE_1 : 007B00E1, match 007B00E1
PROCESSING : dbi_S1_Boot_MSM8974_LA1_04_15_AID_4_S1-SDI2-6732-PID1-0004-SDI_S1-BOOT-6732-0004-MMC.sin
PROCESSING : emmc_appsboot_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID09-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
PROCESSING : s1sbl_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID65-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
PROCESSING : sbl1_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID00-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
PROCESSING : tz_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID07-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
MINOR ERROR [ 0x801E003F_, err: 0017 ]
error while uploading final DATA block
Break.
FINISHED
Elapsed:82 secs.

[GUIDE] Z Ultra and Z1 HARD BRICK RECOVERY

Member

Deleted member 3665957

Guest

Member

Member

Member

Member

Senior Member

Member

Deleted member 3665957

Guest

Member

Senior Member

Member

New member

Senior Member

Attachments

Senior Member

Member

Senior Member

New member

Senior Member

Member

Similar threads

Top Liked Posts