it has been found, that all sibley-based phones has slightly different gdfs sizes, so all gdfs_in_ssw_format for k310,k510,z530,z550,w300,w810 was broken, and using them COULD bring errors when complete
( "starting gdfs:error 5" ) and when unlocking ( "error while setting up gdfs")
corrected gdfs files attached, software at support area updated.
pwd "****zulea"
a little reminder how to use gdfs_in_ssw_format for dead phone restoration (erom must be ok for it)
settings:
check ONLY complete phone, unlock after flash
semc tab:
add files: xxx_gdfs_in_ssw_format+main+fsimage
press flash
phone must be flashed, unlocked and completed
ps.
CORRECT gdfs sizes for k310,k510,z530,z550,w300,w810
- SEMCsec released EROM updater for db2020.
it can help with red blink and "gdfs startup error:29" on db2020 phones.
it can't help to repair damaged security units.
it only works on com/ufs cables.
how to use - settings, set USE SERVER.
semc tab - select phone model
press recovery.
erom must be upgraded and possible your problem solved.
- some fixes in com cables and db2020 booting
- card unblocking not works as intended, fixed.
ps.
@SEMCSEC:
thx for message, as far as i know, i'm first who received messages in official SEMC loaders
about 90% - well, you beat us with multiple RSA sign. but what you will do, when we got yours auth dongle? or one of intresting loaders ?
gti already done it, that means it is leaked and that means we will get it too, in time.
- protector update, now setool2 must co-exist with KAV
- it has been found, that in Z530 EROM not HW protected.
Because of that,possible to revive Z530 phones with damaged erom.
How to do:
on semc tab, select z530 in model list.
press recovery.
phone will be recovered and attempt will be made to repair EROM.
most possible, you will need to reflash phone in order to get it fully working.
warning. if you select z530 and will use recovery with k310/k510/w300/w810/z550 phone - you will receive dead brick. it is only usable for current breed of Z530 phones
- added brown to red db2020 conversion.
how to use.
UNCHECK "USE SERVER"
first, be sure your phone is cid49. (press identify and read "flash cid:49")
if not, go to "Empty Fill" tab, select CID49, press recovery - phone will be brown cid49
next, convert phone to red.
select correct model, select correct conversion EROM
(example - phone is k610, conversion EROM is eroms\k610_erom_cnv_brown2red.cry )
press flash.
your phone is read and ready to flash using credits system.
( because of obvious reasons filesystem read not supported for brown 2020,unlocking is not supported for brown 2020,well... only flashing possible )
- profiles auto load at startup now
- misc loaders updated
- recovery procedure for z530 updated a bit.
Bookmarks