*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
 Sony Ericsson CamDriver Version v1.50_Standard™ by BrAzzUkA's BZK® for w350/w380
 Version v1.50_Standard™ BrAzzUkA's BZK®
 Optimized for the Sony Ericsson  ** Works w350/w380/z555/t280 **
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
WEBSITE:http://www.esato.com/board/viewtopic.php?topic=166396
======================================================
Features OmniVision 9660 camera driver setup:
======================================================
-Video Recording:
                 High Quality= 10fps to 15fps
                 Low  Quality= 15fps to 25fps
                 Normal Mode Dayligth=15fps(SXGA)
                 Low  Quality= 15fps to 30fps(VGA)
                 Normal Mode Dayligth=15fps full resolution SXGA(1280x1024)
                 Nigth  Mode=5fps to 10fps
                 Nigth  Mode=5fps to 10fps
-Properties:
            -high sensitivity for low-light operation
            -low operating voltage for embedded portable applications
            -standard SCCB interface
            -VarioPixel ® method for sub-sampling
            -supports image sizes: SXGA, VGA, CIF, and any size scaling down from CIF to 40x30, and windowed outputs with Raw RGB, RGB565/555/444, YUV (4:2:2) and YCbCr (4:2:2) formats
            -automatic image control functions including:
                                                         - Automatic Exposure Control (AEC)
                                                         - Automatic Gain Control (AGC)
                                                         - Automatic White Balance (AWB)
                                                         - Automatic Black-Level Calibration (ABLC)
            -image quality controls including:
                                              - color saturation
                                              - hue
                                              - gamma
                                              - sharpness (edge enhancement)
                                              - lens correction
                                              - white pixel canceling
                                              - noise canceling
                                              - 50/60 Hz luminance detection 
======================================================
Features w350/380 Standard™ :
======================================================
-Video Recording:Don´t Video Recording Don´t Support Firmware
                 High Quality= 10fps to 15fps
                 Low  Quality= 15fps to 25fps
                 Normal Mode Dayligth=15fps(SXGA)
                 Low  Quality= 15fps to 30fps(VGA)
                 Normal Mode Dayligth=15fps full resolution SXGA(1280x1024)
                 Nigth  Mode=5fps to 10fps
                 Nigth  Mode=5fps to 10fps
-Photo:
            -Property image quality controls including:
                                              - Implemented New Exposure
                                              - Implemented New Normal Mode and Nigth Mode
                                              - Implemented Color Saturation and Brightness
                                              - Implemented Sharpness (edge enhancement)
                                              - Implemented Color Correction with RGB gain
                                              - Implemented Advanced White Balance with Color Correction
                                              - Implemented Gamma
                                              - Implemented Reduce Noise enable auto
                                              - Implemented Lens Correction
                                              - Implemented Blacklevel compensation setting BLC
                                              - Implemented New Flicker and Image Control


====================
User Guide Settings:
====================

Users for a better composition of the photo use the White Balance for these sensors
The color of light reflected off a subject changes with the color of the main light source. The white balance setting on a digital camera adjusts the brightest part of a scene so it appears white. The human eye sees white objects as white regardless of the light source; a digital camera does not.
Digital cameras are set to automatic white balance by default. Automatic white balance does a very good job under most circumstances. However, there are times when white balance needs to be changed manually to match the inside or outside lighting in order to obtain more true-to-life colors in a photo.

======================
White balance Settings
======================
    *
      Auto - default 
    *
      Daylight/ClearSky - for direct sunlight
    *
      Cloudy - for shady, overcast skies
    *
      Fluorescent - for use under fluorescent lighting
    *
      Incandescent/tungsten - for use under standard light bulbs and some types of fluorescent lighting
    *
      Flash - for light produced by the built-in camera flash


**********
Attention:
**********
Need to test the driver for better use of the functions, obviously the driver 
must contain some errors but that in no way compromises the operation of the driver.
Questions and suggestions always look for a developer"modders" to camdrivers 
Learn sites about SE modding! Esato or se-nse is best for that!
Visit the website:
http://www.esato.com/board/viewtopic.php?topic=166396
ENJOY!BrAzzUkA's BZK®