Sony Ericsson CamDriver Version v4.87_SuperNatural™ by BrAzUkA´s for w610 Version v4.87_SuperNatural™ BrAzUkA´s Optimized for the Sony Ericsson w610 ** Works k550 ** //*********************************************************************************************************** // Thanks to all who participated in the development of the driver and // Thanks Raiderski alchemist of the functional properties //*********************************************************************************************************** Features v4.87_SuperNatural™ w610: Implemented some properties of k810: -Image stabilization -Snapshot operation -Check if flash needed -Get EXIF -New SuperNatural™_Color all the scenes -New Exposure -Levels Color Correction Normal/High/Low Features w610 works MCB750: -Video Recording: High Quality= 10fps to 15fps Low Quality= 15fps to 25fps Normal Mode Dayligth=15fps full resolution UXGA SVGA Nigth Mode=5fps to 10fps -Properties: -High sensitivity for low-light operation -Support for Raw RGB, RGB (RGB565/555), GRB422, YUV (422/420) and YCbCr (4:2:2) formats -Supports image sizes: UXGA, SXGA, SVGA -Automatic image control functions: Automatic Exposure Control (AEC) Automatic Gain Control (AGC) Automatic White Balance (AWB) Automatic Band Filter (ABF) Automatic Black-Level Calibration (ABLC) -Image quality controls: Color saturation Gamma Sharpness (edge enhancement) Lens correction White pixel canceling Noise canceling Frequency 50/60 Hz luminance detection -Zooming -Panning -Windowing functions -Internal/external frame synchronization -Variable frame rate control -Supports LED and flash strobe mode -Supports scaling -Supports compression -Embedded microcontroller -Line optical black level output capability -Video or snapshot operation ******************* About Scenes-Effect ******************* *Pseudo Scenes Remove pseudo-scenes super color because for not having any functionality with the chip simply the only change visible in the photos is the saturation of colors that in some cases the real environment distorted The property effects blocks or does not respond to any attempt to stimuli of functions by either not have any functionality ******************* User Guide Settings: ******************* User Settings: You can change values of sharpness, contrast and fps of videorecord to what you want. Don't edit other settings!!! Sharpness and Contrast. Open camdriver, find the AUTO_MODE = #COM_EVENT(51,00) #COM_EVENT(03,10) // Shutter 1/8 sec #COM_EVE.......... etc. AUTO_MODE - name of scene, for example, this is Automatical mode Neccessary parametrs: #COM_EVENT(56,03) (sharpness, now is it 03) #COM_EVENT(55,00); (contrast, now is it 00) You can use this parametrs: (in left values in hex, in the right in dec, for change values in camdriver you needed in hex values) F8=-8; F9=-7; FA=-6; FB=-5; FC=-4; FD=-3; FE=-2; FF=-1; 00=0; 01=1;etc up to 8=08; 08 is maximal. AUTO_MODE - Automatical, NIGHT_MODE - Night Mode, TEXT_MODE - Text, SPORTS_MODE - Sports, TWILIGHT_LANDSCAPE - Twilight Landscape, LANDSCAPE -Landscape, SNOWBEACH - Snow/Beach. Frames per second in Videorecord: Open camdriver and find a: NORMAL_VIDEORECORD= #SET_REG(08,2B) #COM_EVENT(03,20) #CHANGE_MODE(34,81); NIGHT_VIDEORECORD= #SET_REG(08,14) #COM_EVENT(03,09) #CHANGE_MODE(34,81); Notes: NORMAL_VIDEORECORD - normal videorecord, NIGHT_VIDEORECORD - night vr. #SET_REG(08,xx) - maximal fps, when xx - is a value. #COM_EVENT(03,xx) - minimal fps, when xx - is a value. You can use this parametrs: (in left values in hex, in the right in dec, for change values in camdriver you needed in hex values) 02=1fps, 04=2fps, 06= 3fps, 08=4fps, 0A=5fps, 0C =6fps, 0E = 7fps, 0F =7.5fps, 10=8fps, 12=9fps, 14=10fps, 16=11fps, 18=12fps, 1A=13fps, 1C=14fps, 1E=15fps, 20=16fps, 22=17fps, 24=18fps, 26=19fps, 28=20fps, 2A=21fps, 2C=22fps, 2E=23fps, 30=24fps, 32=25fps, 3C=30fps Mini-Guide credits Sonarik Thanks Sonarik! friend BrAzUkA´s **************************************** User Guide Advanced techniques Settings: **************************************** Todays digital cameras are capable of producing amazing images. Automatic exposure and pre-programmed scene modes make it easier than ever to take good shots. Despite all the sophistication, it is possible, even likely, to get poorly exposed and composed photos. If you wish to go take more professional looking photos, familiarize yourself with these more advanced camera settings and techniques. Learn time-honored principles of composition, how to take control over exposure, how to shoot under varied light, the best times of day to take pictures and lots more. //************************************************************************************************** // Suggested Exposure Value settings //************************************************************************************************** // * Bright sunlight coming over the back of you when taking a photo: -0.3 or -0.7 EV compensation // * For shots with strong light coming behind the subject (back lit): +0.7 or +1.0 EV // * Scene with bright sun: 0 to -2 EV // * Snow, beach or highly reflected water: -2/3 to -2 EV // * Close-up of white or yellow flower: -1/3 to -1 EV // * Dimly lit night sky: 0 to +2 EV // * Land or seascape taken just prior to dusk: 0 EV to +2/3 // * Very dark or black objects: + 2/3 to +1 1/3 // // * Settings can vary not only with the scene, but with the phone camera you're using // and each sensor chip and will respond with its capacity and limitation. //************************************************ // White balance, property 1 ******* //************************************************ // Preset white balance settings: // // * // Daylight - for direct sunlight // * // Cloudy - for shady, overcast skies // * // Fluorescent - for use under fluorescent lighting // * // Incandescent/tungsten - for use under standard light bulbs and some types of fluorescent lighting // * // Flash - for light produced by the built-in camera flash // // 0 => auto 1 => tungsten 2 => *fluorescent (fluorescent white/fluorescent yellow) // 3 => clear sky 4 => cloudy // 5 => one push 6 => hold //--------------------------------------------------- //******************************************************************************************** // SUGGESTED SHUTTER SPEEDS //******************************************************************************************** //TO FREEZE ACTION: TO CAPTURE MOTION: //Children - 1/250 - 1/1000 seconds Amusement park rides: +/- one second //Moving water/waterfalls: 1/000 seconds or more Moving water/waterfalls: 4 or more seconds //Sporting event: 1/500 - 1/2000 seconds Fireworks: 1/2 - 4 seconds //Birds in flight: 1/500th a second and above Moving cars at night: 8-10 seconds // Night photography - one or more seconds //The values adjusted to support camera mobile phone better response to the sensor chip //See the table for better adjust //--------------------------------------------------------------------------------------------- //******************************************************************** // Scenes Settings //******************************************************************** // Input value: // 0 => normal 1 => Portrait 2 => Landscape // 3 => Night 4 => Party 5 => Beach/Snow // 6 => Sport // Gives sensor value: // 0 => normal 1 => Portrait 2 => Beach/Snow // 3 => Party 4 => Night 5 => Sport // 6 => Landscape // Use this values for the changes // F8=-8; F9=-7; FA=-6; FB=-5; FC=-4; FD=-3; FE=-2; FF=-1; 00=0; 01=01; etc=>; 08=08; //----------------------------------------------------------------------------------- //************************************************************************************** // SUGGESTED ISO SETTINGS //************************************************************************************** //Low ISO settings(ISO 50-100): High ISO settings(ISO 200 and above): // //*More light needed *Less light needed //*Less noise *Increased noise //*More image detail *Less image detail //*Larger aperture +/or longer shutter speed *Smaller aperture +/or faster shutter speed //--------------------------------------------------------------------------------------- Mini-Guide Settings BrAzUkA´s ********** Attention: ********** Need to test the driver for better use of the functions, obviously the driver must contain some errors but that in no way compromises the operation of the driver. Questions and suggestions always look for a developer"modders" to camdrivers Learn sites about SE modding! Esato or se-nse is best for that! Enjoy! BrAzUkA´s USER GUIDE INSTALL: How to Proceed in CID 50/51/52 with the program *SETOOL/PHONEXS++/FAR: *SETOOL USER GUIDE 1-Unpack the folder tpa_ifs 2-Copy in its tpa_ifs this way: ifs/settings/camera 3-Copy the file "camdriver0" the latest version to the place indicated 4-After passing your tpa_ifs compressed in *.Zip by SETOOL 5-Press the button Flash ********* ATTENTION ********* BEFORE YOU BEGIN INSTALL SECURITY MAKE A BACKUP OF THE CAMERA OLD VERSION DRIVER. THIS STEP IS BASIC FOR OTHER APPLICATIONS. /************************************/ /UNITE FOR CHILDREN / /FOR EVERY CHILDREN / /HEALTH,EDUCATION,EQUALITY,PROTECTION/ /ADVANCE HUMANITY / /************************************/ *A SMILE WORTH MORE THAN ONE COIN OF GOLD* WHAT MAKES YOU DIFFERENT FOR MAKING OF A BETTER WORLD FOR ALL ESPECIES ENERGY AND TECHNOLOGY IN ADVANTAGE FOR ALL SAVE YOUR HOME SAVE THE PLANET EARTH THINK ABOUT! VISITE SITES/WEB: UNICEF: http://www.unicef.org/ THE HUNGER SITE: http://www.thehungersite.com/ GREENPEACE: http://www.greenpeace.org/international/ WWF: http://www.wwf.org/ WHALES: http://www.whales.org/ NATIONAL GEOGRAPHIC: http://www.nationalgeographic.com/ ENJOY! BrAzUkA´s