[size=x-large]Samsung U700 firmware frissítés[/size]
1. Make sure you have U700 FastMultiLoader v5.21, a Samsung SGH-U700 flash file and the original samsung USB cable that came with the phone.
2. Connect the USB cable to your computer and install the USB drivers, unless the are already installed.
3. Remove the battery, the sim card, and the memory card. Attach your phone to the USB cable, button lights will flicker.
4. Run the U700 FastMultiLoader v5.21.
5. Select the third radio button, which lists U700.
6. Tick Boot Change and Full Download then click Boot and select the bootfiles which are inside the folder containing the flash files, for example C:U700XXGF2BOOTFILES.
7. Click the Modem, Rsrc1, Rsrc2 and Factory FS buttons and select the appropriate files. Selecte (Low).r2c rather than (Mid).r2c. FOTA and ETC fields should contain no file.
8. Press the * key on your phone, "download" will be shown on your phone's screen.
9. Click the download button on the U700 FastMultiLoader v5.21 window.
10. When the status says "wait reset!" press the * button again on your phone. When it's done it says "ok complete".
11.Unplug the USB cable, put the sim card and the battery back in and turn the phone on. It will initialise and restart by itself with the new firmware. To check your existing firmware type *#1234# into your handset.
[attachment=263]
Remélem, nem kell lefordítanom, elég volt az U600-ét
A procedúra a telefonhoz kapott USB kábellel megy, eredményeképpen a telefon "megszabadul" a piros szolgáltató menüjétol, és az általa beépített korlátozásoktól, de nem lesz független!
A frissítéshez szükséges fájlok rövidesen a letöltések között lesznek, a firmware-k is frissülnek
Természetesen ha bárkinek problémája van a frissítéssel, keressen meg, segítek!





Válaszol
Quote selected text


Amit egybol tapasztaltam a bill vibrán kivül, hogy sokkal gyorsabb lett a telefon gondolok itt az indulásra, hálozatra jelentkzésre és a bluetooth csatlakozásra is.
