Timeout occured after PPS Procedure
Operating Voltage =  3.0
Command Protocol =  2
Timeout occured waiting for response from the card
A command is in progress
The command is an Internal command
cmd_ptr->hdr.count :  1
The command is :  0x102
The command protocol is :  0x2
Signals pending in uim TCB are :  0x40000200
UIM Task currently is interested in signals :  0x65FD
Num atr bytes is 18
ATR : 0x3b 0xbc 0x94 0x0 0x40 0x14 0x47 0x47 0x33 0x53 0x34 0x43 0x45 0x43 0x32 0x30 0x30 0x30 
Running with FI = 512, DI = 8 
Calculated timeout value is 2565 
uim_rx_state is :  0
uim_tx_state is :  1
This command expects data - Expecting  22 Bytes
We have received 0 Bytes
Bytes received :
APDU being sent :0xa0 0xf2 0x0 0x0 0x16 
Current position in the buffer is :  6 value 0x6f
UART STATUS is :  0xC
